← Blog

QuickBooks Setup for a Cleaning Business: Chart of Accounts, Bank Rules, Payouts, and a Monthly Close

By Jerry, founder of ValLedger and owner of a cleaning company in Colorado's Vail Valley

October 13, 2026 · 10 min read

Most QuickBooks setup guides are written for a generic small business. A cleaning company has its own shape: income from a few kinds of service, a steady stream of small supply purchases, a crew that might be on payroll or on 1099s, vehicles, and clients who pay by card, Zelle, Venmo, and check. Set the file up for that shape once, and month-end becomes checking instead of detective work.

I run a cleaning company in the Vail Valley, and I built ValLedger, which syncs to QuickBooks Online. I'm not an accountant or a CPA. What follows is how I'd explain the setup to a friend, with Intuit's and the IRS's own pages linked for the parts that are facts. None of this is tax or accounting advice. Talk to your bookkeeper or CPA before you lock in your chart of accounts, and before you decide how anything gets reported.

If you're still deciding whether you need QuickBooks at all, start with QuickBooks alternatives for service businesses and come back.

Before you click anything

Settle who on your crew is an employee and who is a contractor, because that decides between payroll accounts and 1099 tracking. I wrote a separate guide on 1099 vs. W-2 for cleaning and landscaping crews. Use one checking account and one card that never touch personal spending. And if a bookkeeper will work in the file, ask how they like accounts named before you build anything.

A chart of accounts that fits a cleaning business

Trim whatever list your file starts with to accounts you'll use. Here's a starting point to take to your bookkeeper:

AccountTypeWhat goes in it
Residential cleaning incomeIncomeRecurring and one-time house cleans
Commercial cleaning incomeIncomeOffices and other commercial contracts
Deep clean and move-out incomeIncomeOne-off heavy jobs
Vacation rental turnover incomeIncomeShort-term rental turnovers, if you do them
WagesExpenseCrew pay through payroll (W-2 only)
Payroll taxesExpenseThe employer's share
SubcontractorsExpensePayments to 1099 contractors
Cleaning suppliesExpenseChemicals, cloths, vacuum bags, consumables
Equipment and toolsExpenseVacuums and other gear (ask your CPA about larger purchases)
Vehicle fuelExpenseGas for work vehicles
Vehicle repairs and maintenanceExpenseOil changes, tires, repairs
InsuranceExpenseLiability, bonding, commercial auto, workers' comp (sub-accounts if you like)
Merchant feesExpenseCard and payment processing fees
SoftwareExpenseScheduling, invoicing, payroll, accounting subscriptions
Advertising and marketingExpenseAds, flyers, lead sources

Income by service type is worth fussing over. If everything lands in one "Sales" line, you can't tell which side of the business carries the rest, or check each service against how you price your cleaning jobs.

Contract labor and wages stay separate. On a Schedule C, the IRS puts contract labor on line 11 and wages on line 26 and says not to mix them. The same instructions list car and truck (line 9), insurance (line 15), and supplies (line 22) separately, so matching accounts make tax time simpler. Other entity types file different forms; your CPA will know.

Merchant fees get their own account because every card payout posts to it. Some bookkeepers also put crew labor and supplies under cost of goods sold to show a gross margin; decide that with yours.

Products and services: one item per thing you sell

Your products and services list is what goes on an invoice line, and each item points to an income account. Intuit's guide to adding product and service items walks through it: create a Service item, give it a name and optionally a default rate, and pick the income account it posts to. Intuit also notes you don't need a separate income account for every item, only for the categories you want to track.

For a cleaning company that might look like:

  • Standard clean, recurring clean, deep clean → Residential cleaning income
  • Move-out clean → Deep clean and move-out income
  • Commercial visit → Commercial cleaning income
  • Turnover clean → Vacation rental turnover income
  • Add-ons (inside oven, inside fridge, interior windows) → whichever income account the main job uses

Sales tax: check your state

Whether cleaning is taxable depends on where you work. As Intuit puts it, depending on the state, products and services are taxable at the standard rate, nontaxable, or have special rates. Check with your state or your CPA before you charge tax or decide not to.

If you collect it, Intuit says to register with your state first, then tell QuickBooks where you collect. QuickBooks then works out the rate from your business location, the invoice address, the customer's tax status, and each item's tax category, so set that category on every service item.

Bank feeds and bank rules

Connect business checking and the business card. Each downloaded transaction is either added as new or, if it already exists in QuickBooks, match it. If something was already entered (by you or by an app that syncs), adding the bank line again counts it twice.

Bank rules do the repetitive categorizing for you. According to Intuit, a rule can check up to five conditions on the description, bank text, or amount, then set the category, payee, and tags, and it can split a transaction between categories by percentage or amount. Two details from the same page:

  • Only one rule applies per transaction, in the order they sit in the rules list. Put specific rules above general ones.
  • Auto-add posts matching transactions without review. Intuit says to use it with caution.

Obvious rules for a cleaning company: your supply house to Cleaning supplies, gas stations to Vehicle fuel, your insurance carrier to Insurance. I'd run them without auto-add for the first month.

Stripe payouts: record gross, not net

This is the part that trips people up. A client pays a $200 invoice by card. A few days later the processor deposits a payout that can cover several payments, minus fees. If you record that deposit as income, the fee disappears and your income looks smaller than what clients paid. If you've also recorded the payment against the invoice, you've now counted the sale twice.

Intuit describes the fix for deposits from a third-party merchant service:

  1. Record each client payment against its invoice, deposited to Undeposited Funds.
  2. Create a Bank Deposit and select the payments that make up the payout.
  3. Under "Add other funds to this deposit," enter the processor's fee as a negative amount and choose your Merchant fees account.

The deposit now equals what hit the bank, the invoices show paid in full, and the fee is an expense. When the payout comes through the bank feed, match it to that deposit. Your bookkeeper may prefer a variation, but the goal is the same: income at what the client paid, fees as their own expense.

If you pass processing fees on to clients, that extra needs a home too. Ask your bookkeeper where, and check your state's rules on card surcharges first.

Zelle, Venmo, cash, and checks

Same pattern: record the payment against the invoice, then make sure it ends up in a deposit that matches a bank line. Intuit describes Undeposited Funds as a temporary holding spot until you record a formal bank deposit, which is how three checks deposited together become one bank line. A payment app that transfers in batches works like Stripe, fee and all. Keep business payments off your personal Venmo. Payment apps can report what you received on Form 1099-K, and your records should tie out to it.

Contractors and 1099s in QuickBooks

Set subcontractors up before you pay them. Intuit's path is Expenses & Bills, then Contractors, then Add a contractor, where you can enter their details yourself or email them to enter their own. Intuit recommends getting a W-9 from each one.

At year-end, preparing 1099s in QuickBooks Online asks you to map your expense accounts to boxes on the form; Intuit says most businesses use Box 1 of the 1099-NEC, nonemployee compensation. It automatically leaves out payments made by credit card, debit card, gift card, or PayPal, because the IRS says card and third-party network payments are reported on Form 1099-K, not on the 1099-NEC.

Two things to check yourself:

  • The threshold changed. Per the IRS instructions, payments made in 2026 need a 1099-NEC at $2,000. Through tax year 2025 it was $600. Some Intuit help pages still say $600 as I write this, so go by the IRS for the year you're filing.
  • Corporations are generally exempt from 1099-NEC reporting, with exceptions such as legal services. Your CPA can confirm for each contractor.

A monthly close checklist

  1. Clear the bank and card feeds. Everything categorized or matched, nothing added twice.
  2. Empty Undeposited Funds. Anything left is a missing deposit or a duplicate payment.
  3. Record payout fees from Stripe and payment app payout details.
  4. Reconcile checking and the business card to their statements.
  5. Review open invoices. A client who paid by Zelle shouldn't still show as owing.
  6. Check contractor payments for a payee and a W-9 on file.
  7. Tie payroll to your payroll provider's reports.
  8. Sales tax, if you collect it: what you owe and when.
  9. Read profit and loss by income account. Which service made money?

What to hand your accountant

  • Profit and loss and balance sheet for the year
  • Bank and card statements, with each month reconciled
  • Contractor list with W-9s and totals paid, noting card or payment app payments
  • Payroll reports from your provider
  • Stripe and payment app payout summaries, plus any 1099-K you received
  • Receipts for larger equipment and vehicle purchases, and loan statements
  • A mileage log, if you use the standard mileage rate
  • Sales tax returns, if you file them

A reconciled file is cheaper to hand over than a shoebox.

What ValLedger sends to QuickBooks, and what it doesn't

ValLedger runs the operational side (quotes, schedule, invoices, payments, expenses) and syncs to QuickBooks Online. Here's exactly what the sync does, because it affects how you set up the file.

It's one-way. ValLedger sends records to QuickBooks. Nothing in QuickBooks comes back into ValLedger.

Invoices. When you create or edit an invoice in ValLedger's invoice editor, it's sent to QuickBooks with the invoice number, due date, and each line's description, quantity, and rate. The first time a client is synced, ValLedger creates them as a QuickBooks customer with their name, email, and phone. It doesn't pick an item from your products and services list for each line, and it doesn't send sales tax as a separate line. Check how the first few land with your bookkeeper. A Sync All Invoices button in Settings pushes every invoice and its recorded payments, catching anything that didn't go automatically.

Payments. Cash, check, Zelle, Venmo, and Cash App payments you record in ValLedger sync automatically, applied to the matching QuickBooks invoice once that invoice exists there. Card and bank payments clients make online through Stripe sync the same way, on their own, as soon as Stripe confirms them. ValLedger doesn't choose a deposit account, and per Intuit's API docs, a payment without one goes to Undeposited Funds, which is where the deposit-with-fee method above starts. The synced payment is the amount applied to the invoice. ValLedger doesn't record Stripe's fee, and a tip or passed-on processing fee isn't in the synced payment, so book those when you record the deposit.

Expenses. A new expense added in ValLedger, on the web or in the app, syncs as a QuickBooks expense. ValLedger picks the expense account by matching words in your QuickBooks account names to its category: "supplies" or "materials" for Materials, "fuel" or "gas" for Fuel, "insurance" for Insurance, "subcontract" or "contractor" for Subcontractor, "labor" or "wages" for Labor, and so on. If nothing matches, it falls back to an account with "Miscellaneous" in the name, or else the first expense account. That's why the plain names in the table above help. Two cautions:

  • It posts as paid from a bank account in QuickBooks, the first one QuickBooks returns rather than one you choose.
  • When the same purchase comes through your bank feed, match it to the synced expense. Don't add it again.

An expense linked to a subcontractor goes over with that subcontractor as the payee. ValLedger finds them in your QuickBooks vendors by name, or adds them, marked for 1099 tracking unless they're set up as a corporation, so QuickBooks' own 1099 prep sees those payments too. Other expenses go over without a payee.

Contractors and 1099s. ValLedger's Reports page has a subcontractor 1099 table for each tax year, using that year's threshold: $600 through 2025, $2,000 from 2026. Totals come from the expenses you've linked to each subcontractor. You can export a 1099 CSV with name, TIN, address, and total paid (the full TIN only for the owner), track W-9s as requested or received with the entity type, and generate a 1099-NEC PDF with recipient and payer copies. That PDF isn't the Copy A you file with the IRS. The total includes everything you logged to that subcontractor however you paid, so back out card payments before you file.

Processing fees. In Settings you can pass card processing fees to clients, which adds a "Processing Fee" line at checkout (about 2.9% plus $0.30), with a separate option for bank transfers (0.8%, capped at $5). With it off, fees come out of your payment.

If that's the part you want off your plate, you can try ValLedger free for 14 days, no credit card required, connect QuickBooks, and watch a week of invoices land.

Try ValLedger free for 14 days.

Quotes, jobs, invoices, and payments in one place, on your phone or the web.

Start Your Free Trial

No credit card required · Every feature included · Cancel anytime